Bryson DeChambeau plays grips that are significantly larger than a standard tour grip — widely reported as an oversized, jumbo-style setup, and the exact size has changed at points in his career. So the honest answer to "what grip size does dechambeau use?" is: an oversize/jumbo-class grip, with the precise dimensions best verified against current public coverage rather than copied as a fixed number. For a club builder, the practical takeaway is not the exact dimension but the method: establish a size reference, define your own feel target, and approve it through a documented sample before ordering.
Why tour grip setups show up in component research
That translation is where most sourcing projects stall. A grip that reads as "jumbo" in an article may differ in actual outer diameter, taper, weight and texture from what lands on your workbench. The components store you buy from can supply the grip; only your sample-and-approval process can confirm it suits the club family and model you are rebuilding.
Treat public tour information as a reference point, not a spec sheet. Public coverage of player equipment is reported second-hand, changes between seasons, and never accounts for build-up wraps, core size matching or the shaft in your club.
The Size–Feel–Approval (SFA) framework
Use three steps to move from a search query to a confirmed order.
1. Size — establish your reference point. Decide what "DeChambeau-sized" means for your build: outer diameter at the mid-hand position, taper profile, and any build-up under the grip. Note that final grip size depends on the shaft's butt diameter and the number of build-up layers, so the same grip model can measure differently on two shafts.
2. Feel — define the target in writing. Before ordering anything, document what you want: firmer or softer compound, texture, taper feel, weight in hand, and how the grip should sit for your grip style. A written feel target is what lets you judge samples objectively instead of by mood.
3. Approval — test, measure, document. Order samples, measure them, install one on a test club, and record the results against your feel target. Only then specify for a full set or for client work.
Translating a size reference into your own build
| Your starting point | What to confirm before specifying | Risk if skipped |
|---|---|---|
| "I want DeChambeau-style oversize grips" | Actual outer diameter of the candidate grip at the mid-hand position, measured on a sample | Grip feels different from the article's description |
| Undersize/standard shaft butt | Butt diameter of your shafts and the grip's core size match | Loose or impossible installation; inconsistent sizing across the set |
| Mixed club families (woods vs. irons) | Whether you want the same grip model on every club or taper-specific variants | Inconsistent feel through the bag |
| Build-up preferences | Number of wraps or build-up material needed to reach your target size | Size drift after re-gripping later |
| Weight and swing feel | Grip weight on a scale, since oversize grips can be heavier | Swing weight and tempo shift you did not plan for |
| Client or multi-club builds | A documented, repeatable spec: grip model, core, build-up, tape layers, measured diameter | Builds that cannot be reproduced |
No dimension in that table should be assumed. Every value — butt diameter, core size, build-up count, finished diameter — is a project-specific question to confirm with your component supplier and against your own measurements.
Sample and approval questions to ask before you commit
Before placing a replacement-grip order, put these questions to your supplier and record the answers:
- Which grip models in your range are available in oversize or jumbo sizes, and can you confirm the current model lineup for the club family I am rebuilding?
- What are the grip's core size and taper options, and how do they correspond to my shaft butt diameter?
- Can you provide samples of the candidate grip models so I can measure and test them before committing?
- What is your current sample policy — including whether a sample fee applies and how sample shipping is handled? (Do not assume; confirm the current policy directly.)
- What documentation accompanies an order — model numbers, lot identification, or spec sheets I can attach to my build records?
- What is the current lead time and shipping arrangement for my quantity and destination? Confirm these as stated policy for your order, not as assumptions.
- If a sample does not pass my feel target, what is the process to compare alternatives before re-specifying?
The point of this list is not to interrogate a supplier — it is to make your approval auditable. A builder who can show a measured diameter, an installation note and a sign-off can reproduce every build and defend every choice.
Request the Sourcing Brief
If you have a target size, a club brand, family and model in mind, and at least one open question from the list above, send it to DIY-Golf as a Sourcing Brief. Include: your club model, your shaft butt diameter if known, your size and feel targets, and the questions you need answered. Our team will respond with the relevant grip component options and the current terms you need to confirm. [Request the Sourcing Brief →]
Or start smaller: copy this five-point checklist, tick what you know, and attach it to your first enquiry.
- Club brand, family and model I am re-gripping
- My size reference (standard / midsize / oversize / jumbo, or a measured diameter)
- Shaft butt diameter, if known
- Feel target: compound, texture, taper, weight
- Sample requirement: which models I want to test first
FAQ
What grip size does DeChambeau use, exactly? Public coverage consistently describes him playing a notably oversized, jumbo-class grip, but the exact model and dimensions have varied over his career and are reported second-hand. Verify against current sources before treating any figure as a spec.
Can I just buy "the DeChambeau grip"? Tour players use equipment configured for their specific measurements and preferences. Treat his setup as inspiration for a size and feel direction, then confirm fitment against your own shafts through samples.
Does a bigger grip change how the club performs? A grip changes hand action, feel and perceived stability — and grip weight can influence swing weight. What it does for your game is a question for your own testing, not for a product page.
Do I need the same grip size on every club? That is a fitting decision. Some builders keep one model across the bag; others vary by club type. Define it in your feel target and document it in your spec before ordering.
How do I make sure the grip I order fits my shafts? Confirm the grip's core size against your shaft butt diameter, account for build-up, and verify with a measured sample installed on one club before committing to a full order.
Master Your Swing, DIY Your Fit. DIY Golf is the premier destination for the technical golfer. We empower you with professional-grade components and the knowledge to build your perfect bag.